Photo detail

Camera Maker Nikon Corporation Camera Model NIKON D90
Aperture f/4.2 Exposure Value 0 EV
Exposure Program Unknown: 0 Exposure Time 1/60 sec
Flash Flash, Auto-Mode, Return light detected Focal Length 34 mm
ISO 800 Metering Mode Pattern
Date/Time 2016:03:16 19:57:21 Resolution Unit Inch
X Resolution 240 dots per ResolutionUnit Y Resolution 240 dots per ResolutionUnit
Compression Jpeg Compression Contrast 0
Exposure Mode 0 Saturation 0
Scene Type Directly Photographed Sharpness 0
Subject Distance 0.79 Caption The EDGE CPC uses a mix of metal and nylon bearings. The balls appeared to be greased in something the consistency of Vaseline. The nylon appears slightly larger than the metal, but that could be an optical illusion. This mix of metal and nylon appears to work much better than the old approach of using only plastic bearings and after removal of the clutch, the motion was quite smooth and easy. However, by that time it made sense to investigate further, and by this point, I'm already here so why not try the all-metal approach, saving the existing balls in case I need to put them back.