| Camera Maker | Nikon Corporation | Camera Model | NIKON D90 |
| Aperture | f/4 | Exposure Value | 0 EV |
| Exposure Program | Unknown: 0 | Exposure Time | 1/60 sec |
| Flash | Flash, Auto-Mode, Return light detected | Focal Length | 26 mm |
| ISO | 800 | Metering Mode | Pattern |
| Date/Time | 2016:06:25 20:45:49 | Resolution Unit | Inch |
| X Resolution | 240 dots per ResolutionUnit | Y Resolution | 240 dots per ResolutionUnit |
| Compression | Jpeg Compression | Contrast | 0 |
| Exposure Mode | 0 | Saturation | 0 |
| Scene Type | Directly Photographed | Sharpness | 0 |
| Subject Distance | 0.71 | Caption | This is the top of the spreader printed on glass. It adheres well to a heated bed, but starts curving up at the edges (which it turns out aren't heated on my printer). Note however that the lines are still pretty visible as this material just doesn't extrude well. I like the slick look, but may try something different to see if I can reduce the warping. |