| Camera Maker | Nikon Corporation | Camera Model | NIKON D90 |
| Aperture | f/5.6 | Color Space | sRGB |
| Exposure Value | -1 EV | Exposure Program | Program |
| Exposure Time | 1/60 sec | Flash | Compulsory Flash, Return light detected |
| Focal Length | 105 mm | ISO | 200 |
| Metering Mode | Pattern | Date/Time | 2017:06:15 22:50:00 |
| Resolution Unit | Inch | X Resolution | 240 dots per ResolutionUnit |
| Y Resolution | 240 dots per ResolutionUnit | Compression | Jpeg Compression |
| Contrast | 0 | Exposure Mode | 0 |
| Saturation | 0 | Scene Type | Directly Photographed |
| Sharpness | 0 | Caption | Various views of the completed modification since it's a challenge getting a good image with enough resolution. If I'd had an appropriate nosepiece handy I'd have tried for a shot through the microscope! The solder joint at the resistor doesn't look very pretty, with some residual solder on the isulation and conformal coating. That connection was a real challenge getting the solder to melt at the board/component interface. That part must have a via to the ground plane very close to the connection. I didn't want to apply heat for two long as it would potentially loosen the whole component or damage a trace on the board. |