Camera Maker |
Nikon Corporation |
Camera Model |
NIKON D7500 |
Aperture |
f/4.2 |
Color Space |
sRGB |
Exposure Value |
0 EV |
Exposure Program |
Unknown: 0 |
Exposure Time |
1/60 sec |
Flash |
Flash, Auto-Mode, Return light detected |
Focal Length |
35 mm |
ISO |
4500 |
Metering Mode |
Pattern |
Date/Time |
2020:05:09 07:29:11 |
Resolution Unit |
Inch |
X Resolution |
240 dots per ResolutionUnit |
Y Resolution |
240 dots per ResolutionUnit |
Compression |
Jpeg Compression |
Contrast |
0 |
Exposure Mode |
0 |
Saturation |
0 |
Scene Type |
Directly Photographed |
Sharpness |
0 |
Caption |
I attached the GPS module directly to the previous sticky tape and used a tie-wrap pad to attach the arduino nearby. I had made more than enough cable to reach the connector, but went ahead and left it long, which meant bundling at the end with another tie wrap sticky pad. I went ahead and routed behind the arm like the RF cable had run to the old GPS module. |