| Camera Maker | Samsung | Camera Model | SM-G960U |
| Aperture | f/1.5 | Color Space | sRGB |
| Exposure Value | 0 EV | Exposure Program | Program |
| Exposure Time | 1/60 sec | Flash | No Flash |
| Focal Length | 4.3 mm | ISO | 320 |
| Metering Mode | Center Weighted Average | Date/Time | 2020:05:08 15:31:06 |
| Resolution Unit | Inch | X Resolution | 240 dots per ResolutionUnit |
| Y Resolution | 240 dots per ResolutionUnit | Compression | Jpeg Compression |
| Brightness Value | 0.16 | Exposure Mode | 0 |
| Scene Type | Directly Photographed | Caption | I went back and soaked the encoder idsk in acetone for a while to remove all the old polish and then carefully removed contamination and re-applied a layer of clear polish. There's a sticky layer that he acetone was attacking between the plastic and the metal. If I thought it was just holding the plastic, I'd let it soak until it came off, but I suspect that the slots are printed on the plastic and then that's glued on the aluminum. |