| Camera Maker | Samsung | Camera Model | SM-G991U |
| Aperture | f/1.8 | Color Space | sRGB |
| Exposure Value | 0 EV | Exposure Program | Program |
| Exposure Time | 1/120 sec | Flash | Flash |
| Focal Length | 5.4 mm | ISO | 40 |
| Metering Mode | Center Weighted Average | Date/Time | 2026:02:16 08:57:46 |
| Resolution Unit | Inch | X Resolution | 240 dots per ResolutionUnit |
| Y Resolution | 240 dots per ResolutionUnit | Compression | Jpeg Compression |
| Brightness Value | 4.76 | Exposure Mode | 0 |
| Scene Type | Directly Photographed | Caption | Cutting a chunk of plate the thickness of the web between flanges using the plasma cutter. I then used the cuttoff wheel to slice this into strips to create beam stiffeners to be used at mid-span and posts. These will prevent the flanges from twisting around the longitudinal direction. I switched to the cutoff blades to reduce material loss and leave a flat surface. If I used the plasma cutter, I'd still have to come back and grind it flat afterwards. |