| Camera Maker | Samsung | Camera Model | SM-G991U |
| Aperture | f/1.8 | Color Space | sRGB |
| Exposure Value | 0 EV | Exposure Program | Program |
| Exposure Time | 1/2500 sec | Flash | Flash |
| Focal Length | 5.4 mm | ISO | 40 |
| Metering Mode | Center Weighted Average | Date/Time | 2026:02:28 14:37:30 |
| Resolution Unit | Inch | X Resolution | 240 dots per ResolutionUnit |
| Y Resolution | 240 dots per ResolutionUnit | Compression | Jpeg Compression |
| Brightness Value | 9.31 | Exposure Mode | 0 |
| Scene Type | Directly Photographed | Caption | Did this a bit differently, with the one long piece of C channel to block the rail from coming back towards me and the outside piece removed. I then used the outside piece and C clamp to gradually stand the beam up on the post so it couldn't go anywhere. Much better! Only real problem in this orientation was that the purlin on the forks was hanging out too far to the left (observatory) side, making it really hard to lift and maneuver that end into place. |